Beads
Jewellery Making Supplies
Tools
Metal Stamping

Rivets

Out of stock!
Enter your email to be informed when this product arrives:


Send Close
Rivets
Show:
Sort By:
ImpressArt Crystal Czech Rivets, 6mm, 5Pcs ..
£3.00 Ex Tax: £2.50
A pack of five Czech rivets in Light Green, made by ImpressArt. Perfect for embellishing leather and metal stamping!  ..
£3.00 Ex Tax: £2.50
Metal Elements Aluminium Hollow Rivet for Metal Stamping, 1/16, 100 pcs ..
£6.43 Ex Tax: £5.36
A pack of approximately 100 brass hollow eyelets for metal stamping. Diameter 1/16" and length 5/32".  ..
£4.94 Ex Tax: £4.11
To rivet: Simply punch or drill a 1.6mm hole into your pieces, slide the rivet through both pieces. Cut excess length off the rivet end to about 1/16'. Lay your pieces on a hard surface, preferably a rubber block and a steel bench block (available in our tools section), with the nail head facing down and the rivet end slightly protruding. Lightly tap, using a ball peen or chasing hammer, the rivet end so it spreads out slightly over the hole opening. Gradually increase the intensity of the..
£8.01 Ex Tax: £6.67
To rivet: Simply punch or drill a 1.6mm hole into your pieces, slide the rivet through both pieces. Cut excess length off the rivet end to about 1/16'. Lay your pieces on a hard surface, preferably a rubber block and a steel bench block (available in our tools section), with the nail head facing down and the rivet end slightly protruding. Lightly tap, using a ball peen or chasing hammer, the rivet end so it spreads out slightly over the hole opening. Gradually increase the intensity of the..
£6.43 Ex Tax: £5.36
To rivet: Simply punch or drill a 1.6mm hole into your pieces, slide the rivet through both pieces. Cut excess length off the rivet end to about 1/16'. Lay your pieces on a hard surface, preferably a rubber block and a steel bench block (available in our tools section), with the nail head facing down and the rivet end slightly protruding. Lightly tap, using a ball peen or chasing hammer, the rivet end so it spreads out slightly ..
£8.02 Ex Tax: £6.68
To rivet: Simply punch or drill a 1.6mm hole into your pieces, slide the rivet through both pieces. Cut excess length off the rivet end to about 1/16'. Lay your pieces on a hard surface, preferably a rubber block and a steel bench block (available in our tools section), with the nail head facing down and the rivet end slightly protruding. Lightly tap, using a ball peen or chasing hammer, the rivet end so it spreads out slightly over the hole opening. Gradually increase the intensity ..
£8.02 Ex Tax: £6.68
To rivet: Simply punch or drill a 1.6mm hole into your pieces, slide the rivet through both pieces. Cut excess length off the rivet end to about 1/16'. Lay your pieces on a hard surface, preferably a rubber block and a steel bench block (available in our tools section), with the nail head facing down and the rivet end slightly protruding. Lightly tap, using a ball peen or chasing hammer, the rivet end so it spreads out slightly over the hole opening. Gradually increase the intensity of the..
£6.43 Ex Tax: £5.36
To rivet: Simply punch or drill a 1.6mm hole into your pieces, slide the rivet through both pieces. Cut excess length off the rivet end to about 1/16'. Lay your pieces on a hard surface, preferably a rubber block and a steel bench block (available in our tools section), with the nail head facing down and the rivet end slightly protruding. Lightly tap, using a ball peen or chasing hammer, the rivet end so it spreads out slightly over the hole opening. Gradually increase the intensity of the..
£8.01 Ex Tax: £6.67
To rivet: Simply punch or drill a 1.6mm hole into your pieces, slide the rivet through both pieces. Cut excess length off the rivet end to about 1/16'. Lay your pieces on a hard surface, preferably a rubber block and a steel bench block (available in our tools section), with the nail head facing down and the rivet end slightly protruding. Lightly tap, using a ball peen or chasing hammer, the rivet end so it spreads out slightly over the hole opening. Gradually..
£8.01 Ex Tax: £6.67
Approximately 100 brass hollow rivets for metal stamping, 1/16" diameter and a length of 3/32".  ..
£4.94 Ex Tax: £4.11